您好,歡迎訪問山東大通機械科技有限公司官網!
0533-4120999
18653389386
山東大通機械科技有限公司
您的位置:主頁 > Industry News > 行業新聞 >

Industry News

聯系我們

山東大通機械科技有限公司

地址:山東淄博市博山區城東辦事處良莊
手機:18653389386

咨詢熱線0533-4120999

How to maintain the cone crusher

發布時間:2020-04-20 08:49人氣:

The cone crusher is widely used in the crushing industry due to its high cost performance. However, through the company's return visit and patrol inspection to customers, it is found that users lack the understanding of maintenance in the process of using the crusher. Now, the precautions for maintenance of the cone crusher are listed as follows:
 
The maintenance of the crusher is divided into large, medium and small maintenance. The maintenance process must be carried out regularly according to the reasonable maintenance time of the equipment, and fatigue operation must be avoided.
 
1、 Minor maintenance
 
The small maintenance includes:
 
1. Check the integrity of spherical tile, if there is damage, repair or replace it;
 
2. Check the wear condition of large and small cone wheels, and replace the ones with excessive wear in time;
 
3. Repair and check all kinds of kits, such as eccentric shaft sleeve, taper sleeve and straight sleeve;
 
4. Repair the threads of adjusting ring and supporting ring;
 
5. Change all kinds of lubricating oil regularly;
 
Each minor repair of the above items may not be carried out completely, which shall be selected according to the actual situation
 
 
 
2、 Medium maintenance
 
1. Replace the large and small bevel gears in time;
 
2. Replace the transmission bearing and spherical bearing in the cone crusher;
 
3. Check the clearance between the spherical bearing seat of cone crusher and the upper end face of eccentric shaft sleeve;
 
4. Check the wear of the spherical bearing seat and the body, and the matching part of the cone and the main shaft of the cone crusher, and replace it if necessary.
 
3、 Overhaul and maintenance
 
Overhaul and maintenance are recommended to be carried out once a year.
 
1 including all contents of medium maintenance;
 
2. Disassembly, inspection, measurement, repair or replacement of all parts;
 
3 check, repair or replace the adjusting ring, supporting ring, spring and spring bolt;
 
4. Calibrate the technical performance of the whole crusher, and carry out technical transformation according to the specific situation
 
 
 
There are two ways to work out the maintenance cycle: one is to determine how many tons of ore to be crushed; the other is to determine how long to operate according to the load. Only taking effective maintenance measures can make the equipment operate normally and reduce unnecessary shutdown loss.

推薦資訊

0533-4120999
北京幸运28是正规的吗 天津 11选五最新开奖 股票涨跌怎么计算 江西快3和值走势图 快乐8稳拿888a。me真诚 四肖期期准一刘伯温 上证指数走势图分析 江西11选5走势图前三表 有50万闲钱怎样理财k 中国福利彩票大厅 安徽快3推荐号一定牛